Specifications of Cupric Chloride USP Grade
CuCl2-2H2O -- 170.48
Copper chloride (CuCl2) dihydrate.
Copper(2+) chloride dihydrate CAS 10125-13-0
Anhydrous 134.45 CAS 7447-39-4
Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.
Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Organic volatile impurities: meets the requirements.

Cupric Chloride
Copper II Chloride or CAS Number: 10125-13-0 for Dihydrate & 7447-39-4 for Anuydrous, USP Reagent Grade Suppliers Exporters, Manufacturers

Cupric Chloride Dihydrate Analytical Reagent Grade
Copper (II) Chloride Dihydrate
CuCl2- 2H2O
Formula Weight 170.48
CAS Number 10125-13-0

Cuprous Chloride
Copper I Chloride or CAS Number: 7758-89-6 Suppliers Exporters, Manufacturers

MAXIMUM ALLOWABLE
Insoluble matter: 0.01% maximum.
Nitrate (NO3): 0.015% maximum.
Sulfate (SO4): 0.005% maximum.
Calcium (Ca): 0.005% maximum.
Iron (Fe): 0.005% maximum.
Nickel (Ni): 0.01% maximum.
Potassium (K): 0.01% maximum.