Guar Gum Slurry Powder & Granules

Annie Chemie Pvt. Ltd, is a pioneer manufacturer and exporter of Specialty chemicals, oil field shale gas fracking or hydraulic fracturing chemicals, Located at Dahej in Gujarat, India. Annie Chemie Pvt. Ltd, has manufacturing facilities and associates spread across USA, Canada, Russia, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Guar Gum Powder Granules for Hydraulic Fracturing Application: It is FHG grade guar which may be called fast or quick or rapid hydration guar gum powder. FHG guar gives viscosity in a few minutes, unlike the other grades, that takes a couple of hours.

FHG is slurry-able up to 50% solids in diesel fuel. The polymer has excellent pump ability at 50% solids, minimal settling in #2 diesel fuel, good hydration out-of-diesel into the aqueous phase and good thermal stability. It has excellent shelf life as dry powder or in the diesel slurry.

Specifications of Fast Hydrating Guar Gum Powder Granules

Color	Off White / Ceramish
Mesh	200 Mesh retain 02% for Powder
Texture	Fine powder soluble in water
Ash	01.00% Max.
Protein	05.00% Max.
Moisture	07.00% Max.
Gum (By Diff)	85.00% Min
pH	5 to 8

Apart from guar gum powder, we also offer agglomerated guar gum powder, that looks like granules and has the same surface area and speed of dissolution as that of the powder. Fast-dispersible granules are like powders except instead of being dust-like, they are formulated as small porous granules of 20-100 mesh. They are more easily measured and mixed on site. They want form gel-like un-dissolved lumps in solution. Because of low dust, they cause less inhalation hazard to the operator during handling.

Guar Gum Slurry, 4 lb/ga, FHG 40-45

Use:
Guar Gum Slurry is suspension of high quality Guar Gum in a Mineral Oil and is used as a viscosifier in hydraulic fracturing and is the preferred source for guar gum due to its rapid hydration and the fact that by using slurry potentially damaging fish-eyes are not formed.

Specifications of Guar Gum Slurry:

Parameters	Specifications
Appearance	Light Cream, Liquid
Fann Viscosity @ 3 mins*	40
Fann Viscosity @ 60 mins*	45
Odor	Mineral Oil

*0.48% Hydration @ 25 deg. C; Fann-35 Viscometer @ 300 rpm; 2.5 mins stirring at 1,500 rpm)
Compatibility: Compatible with known fracturing fluids additives. A compatibility test is always recommended.

Enquiry